Date: Feb 18, 2013 7:35 PM
Subject: Re: Limiting output range; computing n log2 n
"Steven_Lord" <email@example.com> wrote in message <firstname.lastname@example.org>...
> "Ray" <RayMitchell@MeanOldTeacher.com> wrote in message
> > "Bruno Luong" <email@example.com> wrote in message
> > <firstname.lastname@example.org>...
> >> "Ray" <RayMitchell@MeanOldTeacher.com> wrote in message
> >> >
> >> > Thanks for the response. That does fix the issue in my question 2, but
> >> > the issue in question 1 still exists.
> >> Use axis() command to fix the range you want the plot appears.
> >> Bruno
> > Bruno,
> > As shown in my sample code I have used axis([0, 40, 0, 200]) to provide
> > the desired range of the axes and I have limited the values that will
> > actually be used on the x axis by doing n = 0:1:40; However, for the last
> > two cases that I am plotting the value of y will be much greater than 200,
> > thereby causing the y axis to be greatly compressed in order to display
> > these large values. Is there a way to tell it not to display any y values
> > greater than a certain value?
> Call AXIS _after_ plotting to force the limits to be what you want.
> Steve Lord
> To contact Technical Support use the Contact Us link on
That did the trick! Thanks for your help!