You should contact MathWorks tech support about this. They will get your problem addressed.
Gordon Weast xPC Target Development MathWorks
Neil wrote: > Hello, > > I have been having issues with booting xpc target in standalone mode for > a while now and I cannot understand why. I have read all of the > instructions (from multiple sources) regarding booting in standalone mode: > > -Go to xpc Target Explorer > -Select standalone mode as a boot option > -Make sure the target preferences match the computer (such as IP) > -Go to the model and compile it: a "model_xpc_emb" folder will appear. > -Copy and paste the contents of this folder to the USB drive > -Edit the 'autoexec.bat' file to include the correct model name "xpcboot > Target_model.rtb" instead of the default "xpcboot Target~1.rtb" > > I perform these steps, reboot the computer and then it simply boots into > Host-Target mode for some strange reason. I have repeated these steps > tens of times with few variations resulting in either the aforementioned > result or with the computer freezing. The only files on the drive are > the three stated that are required to boot in standalone mode. > > Host-Target mode runs perfectly fine. > > My setup is: > > Matlab 2012a > xPC Target version 5.2 (R2012a) > Processor: Intel Core Duo > OS: Windows XP Professional