Bedsheet Problem
From Math Images
- Take a piece of paper. Now try to fold it in half more than 7 times. Is it possible? What is the ultimate number of folds a flat piece of material can achieve? This image shows Britney Gallivan’s success at folding a sheet 12 times.
Bedsheet Problem |
---|
Contents |
Basic Description
The bedsheet problem is an urban legend that states the following: any piece of paper (no matter the dimensions) cannot fold more than 7 times . All who claimed the myth was valid could only cite empirical evidence. They could not explain or prove it mathematically. The puzzle was both mysterious and inexplicable.Theoretically if we are given an infinitely long sheet of paper, then there should be no absolute folding limit. However, this result does not seem true when the experiment is conducted. In December 2001, Britney Gallivan created a mathematical representation of the bedsheet problem in which she described the interaction between the thickness, length, and number of folds that were possible. Gallivan's mathematical model describes the reality of the physical system. Her derivation gives the loss function for folding a piece of paper in half.
Debunking the Myth
Britney Gallivan, who was at the time a junior in high school, solved this well-known problem. She was asked by her teacher to fold a sheet of paper 12 times and as an incentive she would get extra credit. She failed multiples times. Later she succeeded after using a thin gold sheet and proved the assumption wrong. Gallivan was able to achieve 12 folds by folding a roll of thin toilet paper that stretched over three-fourths of a mile. It took seven hours in a shopping mall with her parents, but Gallivan was able to bust a myth as well as derive a formula relating the width, thickness of a paper and the number of folds achievable. The urban legend of 7 folds was disproved in 2001.
Folding Directions
Gallivan wrote a pamphlet on her discovery in which the majority of the information is based on.
The length of a fold adds up to the length of the flat top and bottom and the circumference of the semi-circle once the ends of the paper have a noticeable curve. This is shown in Image:.jpg. We will call this the nth fold. The next fold which is called the n+1th fold can be achieved if and only if its length is greater than or equal to the circumference of the previous fold's curved section. When the n+1th fold is performed the flat top and bottom is halved and the thickness of the previous fold is included in this new length. At this point in the thickness of the n+1th fold is double the thickness of the nth fold. Using these relationships Gallivan was able to construct an equation where L, is the minimum possible length of the material, t is the thickness of the material, and n is the possible number of folds.
Although we say n is the possible number of folds, we need to be more specific and indicate in what given direction are we folding the material. There are in fact many directions that the sheet can be folded. We will focus on just two. The first is linear folding. This occurs when the length of the paper is much greater than the width. We take the ends of one side of width and place the vertices on top of the opposite ends with carefulness and accuracy. We continue to fold in this manner until it cannot be done anymore. This way of folding is shown in .Using this method, the thickness of the sheet of paper limits the amount of times the paper can be folded. After each fold the thickness doubles. For example after the third fold the thickness is the same as eight sheets. This brings up the issue with folding a sheet of paper in half: it ends up being very thick really fast. In fact, the limit of the folding occurs when the thickness is more than the width. At this point the paper is bent and has curved ends. It is no longer flat and much harder to fold. If we fold in the same direction, which we would not usually do in reality, a narrow strip with a constant thickness will form. Then after a certain number of folds, the thickness will double each time and the length is halved.
The second method to fold is the alternative direction. We begin the same like in the linear folding the vertices of the width's side will touch. Then we will rotate the paper and take the vertices of the now length sides, which is half the original length, and place it onto of the opposite vertices. These vertices should still be on the same side. The folding repeats until it reaches it limit. thumb|Alternative Folding|left|200px depicts the alternative folding method.
The alternative method's width is halved every two folds. The thickness behaves the same: it doubles every fold. Folding a sheet in alternative direction requires that the sheet is wide enough to make a fold in the other direction. From this the sheet would have a greater volume than the first method of folding if they were to have the same number of n, the possible number of folds. Folding in alternative direction has one advantage. Unlike folding in one direction the sheet will not unravel a previous fold.
King's Problem
Overall the paper folding connects to exponential growth. This is the essence of exponential growth: very small amounts rapidly become astronomically large through simple doubling. There is a math folktale about a clever merchant who asked the King to pay him with grains of wheat on a chessboard. The merchant asked the King to place one grain on the first square, two on the second, four on the third, eight on the fourth, sixteen on the fifth, and so on until the 64 boxes were filled. The king was too proud to admit that he could not calculate the sum of the grains. He foolishly granted the wish, not knowing that it would wipe out his stock and he would be in debt. Imagine the 20th box where the number 2 is multiplied by itself 20 times. This means that just on the 20th box the merchant would have more than a million grains. This is an example of exponential growth.
The bed sheet problem though becomes a little bit more complex. The thickness does not simply double after each fold. When a sheet of paper is folded, one end of the paper is placed onto the opposite end. The paper begins to crumple and it does not fold smoothly. With each fold the additional layers make it hard to lay one end over the opposite side. The paper begins to curve and puff at the ends. After a certain number of folds (this varies based on the thickness and width of the paper) the paper will reach a limit and any additional folds will no longer keep the paper long and flat but rather it will be a semi-circle. In addition to the thickness doubling, the sheet of paper begins to curve. The circumference of the semicircle at the edges are the reason why the bedsheet problem does not imitate the King’s Problem.
A More Mathematical Explanation
Derivations
The thickness of a sheet of paper doubles after each fold. With one fold, the sheet has a thickness of two paper, for two folds it has a thickness of 4 sheets of paper and so on. The layers increase by where N is the number of folds. With each fold the sheet fails to remain flat and long. It begins to curve at the edge. The radius of the entire curved section is a half of the overall thickness. With each layer the radius is different. The curved section of the folded sheet is noticeable when the thickness of the paper is equal or greater than the width. With an increase in folds, the radius section begins to take up a greater percentage of the paper's volume. The volume and thickness in the curved section grows exponentially. The volume squares with each fold while the thickness doubles. The folding limit is reached when there is not enough volume or length of the remaining paper to fill the curved section. Any folds pass the absolute limit the entire sheet will become a semi-circle. To be specific we consider the folded section to be the region that has two times the number of folds of the straight layers. The curved ends are not counted as part of the folded section.
Single Direction
Alternative Direction
The equation though isn't completely accurate because it does not include the materials lost in the radii of previous folds. For odd number of folds there is lost if the paper is folded in the odd fold direction. The odd fold do not contribute to the loss in the even fold direction. For large number of folds there is a large gap in accuracy. In practice a sheet of material could not fold that many times or could be that tight. Equation 2 accurately demonstrates the limiting width in reality though.
Limitations
In order to compute the length of the paper required and the thickness of each sheet it is important to understand what exactly limits the number of folds.
- Smoothness
In particular, the smoothness of the paper determines if the paper can slide around the curved sections. As the thickness increases so does the stiffness and the resistance to folding. At this point no human or machine effort can produce another fold. The stiffness issue occurs when the folded section is length is less than π times the thickness. In order to do another successful fold the length to thickness ratio has to be greater than π.
- Radius Section
Another important factor is the difference in length of layers. At the round ends each layer has a different radius and circumference. This can happen when paper is pushed out the folded section and is not included in the curved section. The radius section then takes the majority of the paper’s volume until it reaches a point from making the folded materials into a semi-circle.
- Folding Technique
After each fold, it becomes more difficult to set each layer flatly on top of each other. This happens when layers are not wrinkle free and lumps begin to form in the inner portions. From this, paper extends beyond the folded section.
- Miscellaneous
- The strength of a person can affect how many fold are achievable. The stronger the person the flatter the edges.
- The paper is not uniform.
- There's a difference in the limited number of folds based on whether the paper is being folded in the single direction or the alternative direction.
Related Problem
Rather than how many folds are achievable, a similar problem to the bed sheet problem focuses on the thickness of the sheet of paper. If you were to take a large sheet of paper with thickness 1/400 inch and fold it in half 50 times, how tall would it be (if it was theoretically possible to fold a sheet of paper 50 times)? Most people in their minds would imagine it to be as thick as a phone book. Some might even being daring and say a few feet. After 3 folds the sheet of paper would be as thick as your fingernail. And, if you continue to fold until the paper is at 50 folds then it will be as thick as 40 million miles. The paper would be able to reach the sun and return back to earth. This sounds ridiculous, but it isn't. This is an example in mathematics called geometric progression. Each number in the sequence is multiplied by a fixed number to get the next term.
Why It's Interesting
This problem is interesting because Gallivan showed that any person can do the impossible. She solved a problem that many mathematicians attempted but also failed to solve. It is interesting that a high school student with such fervor demonstrated a person should not accept anything to be true without evidence.Gallivan has inspired others to break the record for most folds. Late April 2011 some students from Massachusetts claimed the world record in achieving 13 folds. They used the thinnest type of toilet paper that stretched over 2 miles. To hear more on their story click here.
Teaching Materials
- There are currently no teaching materials for this page. Add teaching materials.
References
- Folding Paper in Half Twelve Times. Retrieved May 17 2011, from http://pomonahistorical.org/12times.htm
- Kruszenlnicki, Karl. Folding Paper Science Bits Retrieved May 23, 2011, from http://sciencebits.wordpress.com/2008/09/06/folding-paper/
- Gallivan, B. C. 2002. "How to Fold Paper in Half Twelve Times: An 'Impossible Challenge' Solved and Explained." Pomona, CA: Historical Society of Pomona Valley.
- Folding--from wolfram MathWorld. Wolfram Mathworld: The Web's Most Extensive Mathematic Resource. Retrieved May 17 2011, from http://mathworld.wolfram.com/Folding.html
Leave a message on the discussion page by clicking the 'discussion' tab at the top of this image page.