Straight Line and its construction
From Math Images
(Reducing length of Image Name.) 

(13 intermediate revisions not shown.)  
Line 1:  Line 1:  
  {{Image Description  +  {{Image Description Ready 
  ImageName=  +  ImageName=Drawing a Straight Line 
  +  
Image=S351.jpg  Image=S351.jpg  
ImageIntro=The image shows the first planar {{EasyBalloonLink=linkageBalloon=It is defined as a series of rigid links connected with joints to form a closed chain, or a series of closed chains. Each link has two or more joints, and the joints have various degrees of freedom to allow motion between the links.<ref>Wikipedia (Linkage (mechanical))</ref>}} that drew a straight line without using a straight edge. Independently invented by a French army officer, CharlesNicolas Peaucellier and a Lithuanian (who some argue was actually Russian) mathematician Lipmann Lipkin, it had important applications in engineering and mathematics.'''<ref>Bryant, & Sangwin, 2008, p. 34</ref><ref>Kempe, 1877, p. 12</ref><ref>Taimina</ref>'''  ImageIntro=The image shows the first planar {{EasyBalloonLink=linkageBalloon=It is defined as a series of rigid links connected with joints to form a closed chain, or a series of closed chains. Each link has two or more joints, and the joints have various degrees of freedom to allow motion between the links.<ref>Wikipedia (Linkage (mechanical))</ref>}} that drew a straight line without using a straight edge. Independently invented by a French army officer, CharlesNicolas Peaucellier and a Lithuanian (who some argue was actually Russian) mathematician Lipmann Lipkin, it had important applications in engineering and mathematics.'''<ref>Bryant, & Sangwin, 2008, p. 34</ref><ref>Kempe, 1877, p. 12</ref><ref>Taimina</ref>'''  
=Introduction=  =Introduction=  
  What is a straight line? How do you define straightness? The questions seem silly to ask because they are so intuitive. We come to accept that straightness is simply straightness and its definition, like that of point and line, is simply assumed. However, why do we not assume the definition of circle? When using a compass to draw a circle, we are not starting with a figure that we accept as circular; instead, we are using a fundamental property of circles, that the points on a circle are at a fixed distance from the center. This page explores  +  What is a straight line? How do you define straightness? The questions seem silly to ask because they are so intuitive. We come to accept that straightness is simply straightness and its definition, like that of point and line, is simply assumed. However, why do we not assume the definition of circle? When using a compass to draw a circle, we are not starting with a figure that we accept as circular; instead, we are using a fundamental property of circles, that the points on a circle are at a fixed distance from the center. This page explores the answer to the question "how do you construct a straight line without a straight edge?" 
  +  =What Is A Straight Line? A Question Rarely Asked.=  
{{{!}}  {{{!}}  
{{!}}colspan="2"{{!}}Today, we simply define a line as a onedimensional object that extents to infinity in both directions and it is straight, i.e. no wiggles along its length. But what is straightness? It is a hard question because we can picture it, but we simply cannot articulate it.  {{!}}colspan="2"{{!}}Today, we simply define a line as a onedimensional object that extents to infinity in both directions and it is straight, i.e. no wiggles along its length. But what is straightness? It is a hard question because we can picture it, but we simply cannot articulate it.  
Line 16:  Line 15:  
  So what is a straightness anyway? There are a few good answers. For instance, in the {{EasyBalloonLink=Cartesian CoordinatesBalloon=A Cartesian coordinate system specifies each point uniquely in a plane by a pair of numerical coordinates, which are the signed distances from the point to two fixed perpendicular directed lines, measured in the same unit of length.<ref>Wikipedia (Cartesian coordinate system)</ref>}}, the graph of <math>y=ax+b</math> is a straight line as shown in '''Image 1'''. In addition, the shortest distance between two points on a flat plane is a straight line, a definition we are most familiar with. However, it is important to realize that the definitions of being "shortest" and "straight" will change when you are no longer on flat plane. For example, the shortest distance between two points on a sphere is the the "great circle"  +  So what is a straightness anyway? There are a few good answers. For instance, in the {{EasyBalloonLink=Cartesian CoordinatesBalloon=A Cartesian coordinate system specifies each point uniquely in a plane by a pair of numerical coordinates, which are the signed distances from the point to two fixed perpendicular directed lines, measured in the same unit of length.<ref>Wikipedia (Cartesian coordinate system)</ref>}}, the graph of <math>y=ax+b</math> is a straight line as shown in '''Image 1'''. In addition, the shortest distance between two points on a flat plane is a straight line, a definition we are most familiar with. However, it is important to realize that the definitions of being "shortest" and "straight" will change when you are no longer on flat plane. For example, the shortest distance between two points on a sphere is the the {{EasyBalloonLink="great circle"Balloon=A section of a sphere that contains a diameter of the sphere, and great circle is straight on the spherical surface}}as shown in '''Image 2'''. 
Since we are dealing with plane geometry here, we define straight line as the curve of <math>y=ax+b</math> in Cartesian Coordinates.  Since we are dealing with plane geometry here, we define straight line as the curve of <math>y=ax+b</math> in Cartesian Coordinates.  
  For more  +  For more comprehensive discussion of being straight, you can refer to the book '''''Experiencing Geometry''''' by David W. Henderson. 
+  
+  Take a minute to ponder the question: "How do you produce a straight line?" Well light travels in straight line. Can we make light help us to produce something straight? Sure but does it always travel in straight line? Einstein's theory of relativity has shown (and been verified) that light is bent by gravity and therefore, our assumption that light travels in straight lines does not hold all the time. Well, another simpler method is just to fold a piece of paper and the crease will be a straight line. However, to achieve our ultimate goal (construct a straight line without a straight edge), we need a {{EasyBalloonLink=linkageBalloon=It is defined as a series of rigid links connected with joints to form a closed chain, or a series of closed chains. Each link has two or more joints, and the joints have various degrees of freedom to allow motion between the links.<ref>Wikipedia (Linkage (mechanical))</ref>}} and that is much more complicated and difficult than folding a piece of paper. The rest of the page revolves around the discussion of straight line linkage's history and its mathematical explanation.  
{{!}}  {{!}}  
  {{!}}align="center"{{!}}[[Image:Straightline.jpgcenterborder  +  {{!}}align="center"{{!}}[[Image:Straightline.jpgcenterborder300px]] '''Image 1'''{{!}}{{!}}align="center"{{!}}[[Image:SmallGreatCircles 700.gifcenterborder400px]]'''Image 2''' <ref>Weisstein</ref> 
{{!}}}  {{!}}}  
Line 37:  Line 38:  
{{!}}align="center"{{!}}'''Image 3'''<ref>Bryant, & Sangwin, 2008, p. 18</ref>  {{!}}align="center"{{!}}'''Image 3'''<ref>Bryant, & Sangwin, 2008, p. 18</ref>  
{{!}}  {{!}}  
  {{!}}'''Image 3''' shows a patent drawing of an early steam engine. It is of the simplest form with a boiler (  +  {{!}}'''Image 3''' shows a patent drawing of an early steam engine. It is of the simplest form with a boiler (lower left corner), a cylinder with piston (above the boiler), a beam (on top, pivoted at the middle) and a pump (lower right corner) at the other end. The pump was usually used to extract water from the mines but other devices can also be driven. 
{{!}}  {{!}}  
  {{!}}{{HideShowThisShowMessage=Click here to show how this engine works.HideMessage=Click here to hide textHiddenText=When the piston is at its lowest position, steam is let into the cylinder from valve K  +  {{!}}{{HideShowThisShowMessage=Click here to show how this engine works.HideMessage=Click here to hide textHiddenText=When the piston is at its lowest position, steam is let into the cylinder from valve K to push the piston upwards. Afterward, when the piston is at its highest position, cold water is let in from valve E, cooling the steam in the cylinder and causing the pressure in the the cylinder to drop below the atmospheric pressure. The difference in pressure causes the piston to move downwards. After the piston returns to the lowest position, the whole process is repeated. This kind of steam engine is called "atmospheric" because it utilizes atmospheric pressure to cause the downward action of the piston. Since in the downward motion, the piston pulls on the beam and in the upward motion, the beam pulls on the piston, the connection between the end of the piston rod and the beam is always in tension (it is being stretched by forces at two ends) and that is why a chain is used as the connection.<ref>Bryant, & Sangwin, 2008, p. 18</ref> <ref>Wikipedia (Steam Engine)</ref>}} 
{{!}}  {{!}}  
  {{!}}Ideally, the piston moves in the vertical direction and the piston rod takes only axial loading, i.e. forces applied in the direction along the rod. However, from the above picture, it is clear that the end of the piston does not move in a straight line due to the fact that the end of the beam describes an arc of a circle. As a result, horizontal forces are created and subjected onto the piston rod. Consequently, the  +  {{!}}Ideally, the piston moves in the vertical direction and the piston rod takes only axial loading, i.e. forces applied in the direction along the rod. However, from the above picture, it is clear that the end of the piston does not move in a straight line due to the fact that the end of the beam describes an arc of a circle. As a result, horizontal forces are created and subjected onto the piston rod. Consequently, the rate of attrition is very much expedited and the efficiency of the engine is greatly compromised. Durability is important in the design of any machine, but it was especially essential for the early steam engines. For these machines were meant to run 24/7 to make profits for the investors. Therefore, such defect in the engine posed a great need for improvements.<ref>Bryant, & Sangwin, 2008, p. 1821</ref> 
{{!}}}  {{!}}}  
{{{!}}  {{{!}}  
  {{!}}colspan="2"{{!}}Improvements were  +  {{!}}colspan="2"{{!}}Improvements were soon developed to force the end of the piston rod move in a straight line, but these brought about new mechanical problems. The two pictures below show two improvements at the time. The hidden text explains how these improvements work and why they have failed to produce satisfactory results. 
{{!}}  {{!}}  
  {{!}}align="center"{{!}}[[Image:Img325.gifcenterborder500px]]'''Image 4'''  +  {{!}}align="center"{{!}}[[Image:Img325.gifcenterborder500px]]'''Image 4'''<ref>Bryant, & Sangwin, 2008, p. 1821</ref>{{!}}{{!}}align="center"{{!}}[[Image:Img326.gifbordercenter200px]]'''Image 5''' <ref>Bryant, & Sangwin, 2008, p. 1821</ref> 
{{!}}  {{!}}  
  {{!}}colspan="2"{{!}}{{HideShowThisShowMessage=  +  {{!}}colspan="2"{{!}}{{HideShowThisShowMessage=Click to read more about these systems.HideMessage=HideHiddenText=Firstly, "doubleaction" engines were built, part of which is shown in '''Image 4'''. Secondly, the beam was dispensed and replaced by a gear as shown in '''Image 5'''. However, both of these improvements were unsatisfactory and the need for a straight line linkage was still imperative. In '''Image 4''', atmospheric pressure acts in both upward and downward strokes of the engine and two chains were used (one connected to the top of the arched end of the beam and one to the bottom), both of which will took turns being taut throughout one cycle. One might ask why chain was used all the time. The answer was simple: to fit the curved end of the beam. However, this does not fundamentally solve the straight line problem and unfortunately created more. The additional chain increased the height of the engine and made the manufacturing very difficult (it was hard to make straight steel bars and rods back then) and costly. 
+  
+  In '''Image 5''', after the beam was replaced by gear actions, the piston rod was fitted with teeth (labeled k) to drive the gear. Theoretically, this solves the problem fundamentally. The piston rod is confined between the guiding wheel at K and the gear, and it moves only in the upanddown motion. However, the practical problem remained unsolved. The friction and the noise between all the guideways and the wheels could not be ignored, not to mention the increased possibility of failure and cost of maintenance due to additional parts.<ref>Bryant, & Sangwin, 2008, p. 1821</ref>}}  
{{!}}}  {{!}}}  
Line 56:  Line 59:  
{{{!}}  {{{!}}  
  {{!}}colspan="2"{{!}}James Watt found a mechanism that converted the linear motion of pistons in the cylinder to the semi circular motion of the beam (or the circular motion of the [http://en.wikipedia.org/wiki/Flywheel flywheel]) and vice versa. In 1784, he invented a [http://en.wikipedia.org/wiki/Linkage_(mechanical) three member linkage] that solved the linear motion to circular problem practically as illustrated by the animation below. In its simplest form, there are two radius arms that have the same lengths and a connecting arm with midpoint P. Point P moves in a straight line. However, this linkage only produced approximate straight line (a stretched figure 8 actually) as shown in '''Image 7''', much to the chagrin of the mathematicians who were after absolute straight lines. There is a more general form of the Watt's linkage that the two radius arms having different lengths like shown in '''Image 6'''. To make sure that Point P still move in the stretched figure 8, it has to be positioned such that it adheres to the ratio<math>\frac{AB}{CD} = \frac{CP}{CB}</math>.  +  {{!}}colspan="2"{{!}}James Watt found a mechanism that converted the linear motion of pistons in the cylinder to the semi circular motion (that is moving in an arc of the circle) of the beam (or the circular motion of the [http://en.wikipedia.org/wiki/Flywheel flywheel]) and vice versa. In this way, energy in the vertical direction is converted to rotational energy of the flywheel from where is it converted to useful work that the engine is desired to do. In 1784, he invented a [http://en.wikipedia.org/wiki/Linkage_(mechanical) three member linkage] that solved the linearmotiontocircular problem practically as illustrated by the animation below. In its simplest form, there are two radius arms that have the same lengths and a connecting arm with midpoint P. Point P moves in a straight line while the two hinges move in circular arcs. However, this linkage only produced approximate straight line (a stretched figure 8 actually) as shown in '''Image 7''', much to the chagrin of the mathematicians who were after absolute straight lines. There is a more general form of the Watt's linkage that the two radius arms having different lengths like shown in '''Image 6'''. To make sure that Point P still move in the stretched figure 8, it has to be positioned such that it adheres to the ratio<math>\frac{AB}{CD} = \frac{CP}{CB}</math>.<ref>Bryant, & Sangwin, 2008, p. 24</ref> 
{{!}}  {{!}}  
  {{!}}[[Image:Img327.gifcenterborder  +  {{!}}[[Image:Img327.gifcenterborder300px]]{{!}}{{!}}[[Image:Watts linkage.gifcenterborder]] 
{{!}}  {{!}}  
  {{!}}align="center"{{!}}'''Image 6'''  +  {{!}}align="center"{{!}}'''Image 6''' <ref>Bryant, & Sangwin, 2008, p. 23</ref>{{!}}{{!}}align="center"{{!}}'''Image 7''' <ref>Wikipedia (Watt's Linkage)</ref> 
{{!}}}  {{!}}}  
=='''The Motion of Point P'''==  =='''The Motion of Point P'''==  
  We intend to  +  We intend to describe the path of <math>P</math> so that we can show it does not move in a straight line (which is obvious in the animation). More importantly, this will allow us to pinpoint the position of <math>P</math> using certain parameters we know, such as the angle of rotation or one coordinate of point <math>P</math>. This is awfully crucial in engineering as engineers would like to know that there are no two parts of the machine will collide with each other throughout the motion. In addition, you can use the parametrization to create your own animation like that in '''Image 7'''. 
==='''Algebraic Description'''===  ==='''Algebraic Description'''===  
{{{!}}  {{{!}}  
  {{!}}We see that <math>P</math> moves in a stretched figure 8 and will tend to think that there should be a nice  +  {{!}}We see that <math>P</math> moves in a stretched figure 8 and will tend to think that there should be a nice {{EasyBalloonLink=closed formBalloon=In mathematics, an expression is said to be a closedform expression if, and only if, it can be expressed analytically in terms of a bounded number of certain "wellknown" functions. Typically, these wellknown functions are defined to be elementary functions – constants, one variable x, elementary operations of arithmetic (+ – × ÷), nth roots, exponent and logarithm (which thus also include trigonometric functions and inverse trigonometric functions).<ref>Wikipedia (Closedform expression)</ref>}} of the relationship of the <math>x</math> and <math>y</math> coordinates of <math>P</math> like that of the circle. After this section, you will see that there is a closed form, at least theoretically, but it is not "nice" at all. 
{{!}}  {{!}}  
  {{!}}[[Image:JW point P.pngcenter  +  {{!}}[[Image:JW point P.pngcenter500px]] 
{{!}}  {{!}}  
{{!}}align="center"{{!}}'''Image 8'''  {{!}}align="center"{{!}}'''Image 8'''  
{{!}}  {{!}}  
  {{!}}{{  +  {{!}}{{SwitchPreviewShowMessage=Show derivation of the relationship of the <math>x</math> and <math>y</math> coordinates of <math>P</math>.HideMessage=HidePreviewText=We know coordinates <math>{\color{Gray}A}</math> and <math>{\color{Gray}D}</math> because they are fixed.FullText=We know coordinates <math>A</math> and <math>D</math> because they are fixed. Hence suppose the coordinates of <math>A</math> are <math>(0,0)</math> and coordinates of <math>B</math> are <math>(c,d)</math>. We also know the length of the bar. Let <math>AB=CD=r, BC=m</math>. 
  Suppose that at one instance we know the coordinates of <math>B</math> as <math>(a,b)</math>, then <math>  +  Suppose that at one instance we know the coordinates of <math>B</math> as <math>(a,b)</math>, then <math>C</math> will be on the circle centered at <math>B</math> with a radius of <math>m</math>. Since <math>C</math> is on the circle centered at <math>D</math> with radius <math>r</math>. Then the coordinates of <math>C</math> have to satisfy the two equations below. 
<math>\begin{cases}  <math>\begin{cases}  
Line 96:  Line 99:  
  {{  +  {{EquationRef2Eq. 1}}<math>x^2+y^22ax2by+a^2+b^2=m^2</math> 
  +  
  +  {{EquationRef2Eq. 2}}<math>x^2+y^22cx2dy+c^2+d^2=r^2</math>  
  +  
  +  
  +  
  +  
  +  
Subtract {{EquationNoteEq. 2}} from {{EquationNoteEq. 1}} we have,  Subtract {{EquationNoteEq. 2}} from {{EquationNoteEq. 1}} we have,  
  +  
  {{  +  {{EquationRef2Eq. 3}} <math>(2a+2c)x(2b2d)y+(a^2+b^2)(c^2+d^2)=m^2r^2</math> 
  +  
Substituting <math>a^2+b^2=r^2</math> and rearranging we have,  Substituting <math>a^2+b^2=r^2</math> and rearranging we have,  
<math>(2a+2c)x(2b2d)y=m^22r^2+c^2+d^2</math>  <math>(2a+2c)x(2b2d)y=m^22r^2+c^2+d^2</math>  
+  Hence {{EquationRef2Eq. 4}} <math>y=\frac {2a+2c}{2b2d}x\frac {m^22r^2+c^2+d^2}{2b2d}</math>  
+  Now, we can manipulate {{EquationNoteEq. 3}} to get an expression for <math>b</math>, i.e. <math>b=f(a,c,d,m,r,x,y)</math>. Next, we substitute <math>b=f(a,c,d,m,r,x,y)</math> back into {{EquationNoteEq. 1}} and will be able to obtain an expression for <math>a</math>, i.e. <math>a=g(x,y,d,c,m,r)</math>. Since <math>b=\pm \sqrt {r^2a^2}</math>, we have expressions of <math>a</math> and <math>b</math> in terms of <math>x,y,d,c,m</math> and <math>r</math>.  
  +  Say point <math>P</math> has coordinates <math>(x',y')</math>, then <math>x'=\frac {a+x}{2}</math> and <math>y'=\frac {b+y}{2}</math> which will yield  
  +  
  +  
  +  
  +  {{EquationRef2Eq. 5}} <math>x=2x'a</math>  
  {{  +  
  {{  +  {{EquationRef2Eq. 6}} <math>y=2y'b</math> 
  +  
  +  In the last step we substitute <math>a=g(x,y,d,c,m,r)</math>,<math>b=\pm \sqrt {r^2a^2}</math>, {{EquationNoteEq. 5}} and {{EquationNoteEq. 6}} back into {{EquationNoteEq. 4}} and we will finally have a relationship between <math>x'</math> and <math>y'</math>. Of course, it will be a messy closed form but we could definitely use Mathematica to do the maths. The point is, there is no nice algebraic form for that figure 8, though it has closed form and that is why we have to find something else.}}  
  +  
  +  
  +  
{{!}}}  {{!}}}  
  
  
==='''Parametric Description'''===  ==='''Parametric Description'''===  
{{{!}}  {{{!}}  
  {{!}}Alright, since the algebraic equations are not agreeable at all, we have to resort to the parametric description. To think about, it  +  {{!}}Alright, since the algebraic equations are not agreeable at all, we have to resort to the parametric description. To think about, it may be more manageable to describe the motion of <math>P</math> using the angle of ratation. As a matter of fact, it is easier to obtain the angle of rotation than knowing one of <math>P</math>'s coordinates. 
{{!}}  {{!}}  
  {{!}}[[Image:  +  {{!}}[[Image:ParaP.pngcenter500px]] 
{{!}}  {{!}}  
{{!}}align="center"{{!}}'''Image 9'''  {{!}}align="center"{{!}}'''Image 9'''  
{{!}}  {{!}}  
  {{!}}{{  +  {{!}}{{SwitchPreviewShowMessage=Show parameterization of <math>P</math>.HideMessage=HidePreviewText=We will parametrize the <math>{\color{Gray}P}</math> with the angle <math>{\color{Gray}\theta}</math> in conformation of most parametrizations of point.FullText=We will parametrize the <math>P</math> with the angle <math>\theta</math> in conformation of most parametrizations of point. 
<math>\begin{cases}  <math>\begin{cases}  
Line 177:  Line 170:  
{{!}}[[Image:Watt2.gifcenterborder450px]]  {{!}}[[Image:Watt2.gifcenterborder450px]]  
{{!}}  {{!}}  
  {{!}}align="center"{{!}}'''Image 10'''  +  {{!}}align="center"{{!}}'''Image 10''' <ref>Lienhard, 1999, February 18</ref> 
{{!}}}  {{!}}}  
+  ==Watt's Secret==  
{{{!}}  {{{!}}  
  {{!}}colspan="2"{{!}}Imitations were a big problems  +  {{!}}colspan="2"{{!}}Another reason we parameterized <math>P</math> is that Watt did not simply used that three bar linkage shown in '''Image 6''' and '''Image 7'''. Instead he used something different. To understand that, our knowledge of the parameterizaion of <math>P</math> is crucial. Imitations were a big problems back in those days. When filing for a patent, James Watt and other inventors had to explain how their devices worked without revealing the critical secrets so that others could easily copy them. As shown in '''Image 10''', the original patent illustration, Watt illustrated his simple linkage on a separate diagram on the upper left hand corner but try looking for it on the engine illustration itself. Can you find it at all? That is Watt's secret. This is the equivalent of telling you by using the principle of 1+1 makes 2 you could get 34 x 45; the crucial step in understanding (and to make the engine work smoothly in Watt's case) is avoided. What he had actually used on his engine was the modified version of the basic linkage as show in '''Image 11'''. 
+  
+  
+  The link <math>ABCD</math> is the original three member linkage with <math>AB=CD</math> and point <math>P</math> being the midpoint of <math>BC</math>. A is the pivot of the beam fixed on the engine frame while D is also fixed. However, Watt modified it by adding a parallelogram <math>BCFE</math> to it and connecting point <math>F</math> to the piston rod. We now know that point <math>P</math> moves in quasi straight line as shown previously. It is important for two points to move in straight lines now is because one has to be connected to the piston rod that drives the beam, another has to convert the circular motion to linear motion so as to drive the valve gears that control the opening and closing of the valves. It turns out that point F moves in a similar quasi straight line as point P. This is the truly famous James Watt's "parallel motion" linkage.  
{{!}}  {{!}}  
  {{!}}[[Image:Watt1.pngcenterborder  +  {{!}}[[Image:Watt1.pngcenterborder400px]]{{!}}{{!}}[[Image:PointF.pngcenter350px]] 
{{!}}  {{!}}  
{{!}}align="center"{{!}}'''Image 11'''{{!}}{{!}}align="center"{{!}}'''Image 12'''  {{!}}align="center"{{!}}'''Image 11'''{{!}}{{!}}align="center"{{!}}'''Image 12'''  
{{!}}  {{!}}  
  {{!}}{{  +  {{!}}{{SwitchPreviewShowMessage=How would we find the parametric equation for point <math>F</math> then?HideMessage=HidePreviewText=Well, it is easy enough. Refer to '''Image 12'''.FullText=Well, it is easy enough. Refer to '''Image 12'''. <math>\overrightarrow {AB} = (r \sin \theta, r \cos \theta)\therefore \overrightarrow {AE} = \frac {e+f}{r}(r \sin \theta, r \cos \theta)</math>. Furthermore <math>\overrightarrow {AF} = \overrightarrow {AE} + \overrightarrow {BC}</math>. Therefore, <math>\overrightarrow {AF} = \frac {e+r}{r}(r \sin \theta, r \cos \theta) + (m \sin (\frac {\pi}{2} + \beta + \alpha), m \cos (\frac {\pi}{2} + \beta + \alpha))</math>. We now have the parameterization of point <math>F</math> and <math>P</math> and Watt's secret is eventually cracked.}} 
  <math>\overrightarrow {AB} = (r \sin \theta, r \cos \theta)  +  
  +  
  \therefore \overrightarrow {AE} = \frac {e+f}{r}(r \sin \theta, r \cos \theta)</math>  +  
  +  
  Furthermore <math>\overrightarrow {AF} = \overrightarrow {AE} + \overrightarrow {BC}</math>  +  
  +  
  Therefore, <math> \overrightarrow {AF} = \frac {e+  +  
{{!}}}  {{!}}}  
Line 200:  Line 190:  
=='''The First Planar Straight Line Linkage  PeaucellierLipkin Linkage'''==  =='''The First Planar Straight Line Linkage  PeaucellierLipkin Linkage'''==  
{{{!}}  {{{!}}  
  {{!}}align="center"{{!}}[[Image:Peaucellier linkage animation.gifcenterborder]]'''Image 13'''  +  {{!}}align="center"{{!}}[[Image:Peaucellier linkage animation.gifcenterborder]]'''Image 13''' <ref>Wikipedia (Peaucellier–Lipkin linkage)</ref>{{!}}{{!}}Anyway, mathematicians and engineers had being searching for almost a century to find the solution to a straight line linkage but all had failed until 1864 when a French army officer Charles Nicolas Peaucellier came up with his ''inversor linkage''. Interestingly, he did not publish his findings and proof until 1873, when Lipmann I. Lipkin, a student from University of St. Petersburg, demonstrated the same working model at the World Exhibition in Vienna. Peaucellier acknowledged Lipkin's independent findings with the publication of the details of his discovery in 1864 and the mathematical proof. '''Taimina''' 
  +  
  +  
  +  
  
{{!}}  {{!}}  
  {{!}}colspan="2"{{!}}[[Image:PL cell.pngcenterborder  +  {{!}}colspan="2"{{!}}[[Image:PL cell.pngcenterborder500px]] 
{{!}}  {{!}}  
{{!}}align="center" colspan="2"{{!}}'''Image 14'''  {{!}}align="center" colspan="2"{{!}}'''Image 14'''  
Line 227:  Line 213:  
<math>\begin{align}  <math>\begin{align}  
(OA)^2  (AP)^2 & = (OM)^2  (PM)^2\\  (OA)^2  (AP)^2 & = (OM)^2  (PM)^2\\  
  & = (OMPM)\cdot(  +  & = (OMPM)\cdot(OM + PM)\\ 
& = OC \cdot OP\\  & = OC \cdot OP\\  
\end{align}</math>  \end{align}</math>  
Line 233:  Line 219:  
Let's take a moment to look at the relation <math>(OA)^2  (AP)^2 = OC \cdot OP</math>. Since the length <math>OA</math> and <math>AP</math> are of constant length, then the product <math>OC \cdot OP</math> is of constant value however you change the shape of this construction.  Let's take a moment to look at the relation <math>(OA)^2  (AP)^2 = OC \cdot OP</math>. Since the length <math>OA</math> and <math>AP</math> are of constant length, then the product <math>OC \cdot OP</math> is of constant value however you change the shape of this construction.  
{{!}}  {{!}}  
  {{!}}colspan="2"{{!}}[[Image:PLcellproof2.pngbordercenter  +  {{!}}colspan="2"{{!}}[[Image:PLcellproof2.pngbordercenter500px]] 
{{!}}  {{!}}  
{{!}}align="center" colspan="2"{{!}}'''Image 15'''  {{!}}align="center" colspan="2"{{!}}'''Image 15'''  
{{!}}  {{!}}  
  {{!}}colspan="2"{{!}}Refer to '''Image 15'''. Let's fix the path of point <math>C</math> such that it traces out a circle that has point <math>O</math> on it. <math>QC</math> is  +  {{!}}colspan="2"{{!}}Refer to '''Image 15'''. Let's fix the path of point <math>C</math> such that it traces out a circle that has point <math>O</math> on it. <math>QC</math> is the extra link pivoted to the fixed point <math>Q</math> with <math>QC=QO</math>. Construct line <math>OQ</math> that cuts the circle at point <math>R</math>. In addition, construct line <math>PN</math> such that <math>PN \perp OR</math>. 
Since, <math> \angle OCR = 90^\circ</math>  Since, <math> \angle OCR = 90^\circ</math>  
  We have <math> \vartriangle OCR \sim \vartriangle ONP  +  We have <math> \vartriangle OCR \sim \vartriangle ONP and \frac{OC}{OR} = \frac{ON}{OP}</math>. 
  +  Moreover <math> OC \cdot OP = ON \cdot OR</math>.  
  Therefore <math> ON = \frac {OC \cdot OP}{OR} = </math>constant, i.e. the length of <math>ON</math>(or the xcoordinate of <math>P</math> w.r.t <math>O</math>) does not change as points <math>C</math> and <math>P</math> move. Hence, point <math>P</math> moves in a straight line. ∎  +  Therefore <math> ON = \frac {OC \cdot OP}{OR} = </math>constant, i.e. the length of <math>ON</math>(or the xcoordinate of <math>P</math> w.r.t <math>O</math>) does not change as points <math>C</math> and <math>P</math> move. Hence, point <math>P</math> moves in a straight line. ∎<ref>Bryant, & Sangwin, 2008, p. 3336</ref> 
{{!}}}  {{!}}}  
Line 255:  Line 241:  
=='''PeaucellierLipkin Linkage in Action'''==  =='''PeaucellierLipkin Linkage in Action'''==  
{{{!}}  {{{!}}  
  {{!}}[[Image:Adapted.jpgborder  +  {{!}}[[Image:Adapted.jpgborder550pxcenterMr.Prim's adaptation]] 
{{!}}  {{!}}  
{{!}}align="center"{{!}}'''Image 16'''  {{!}}align="center"{{!}}'''Image 16'''  
{{!}}  {{!}}  
  {{!}}The new linkage caused considerable excitement in London. Mr. Prim, "engineer to the House", utilized the new compact form invented by H.Hart to fit his new blowing engine which proved to be "exceptionally quiet in their operation." In this compact form, <math>DA=DC</math>, <math>AF=CF</math> and <math>AB = BC</math>. Point <math>E</math> and <math>F</math> are fixed pivots. In '''Image 16'''. F is the inversive center and points <math>D</math>,<math>F</math> and <math>B</math> are collinear and <math>DF \cdot DB</math> is of constant value.  +  {{!}}The new linkage caused considerable excitement in London. Mr. Prim, "engineer to the House", utilized the new compact form invented by H.Hart to fit his new blowing engine which proved to be "exceptionally quiet in their operation." In this compact form, <math>DA=DC</math>, <math>AF=CF</math> and <math>AB = BC</math>. Point <math>E</math> and <math>F</math> are fixed pivots. In '''Image 16'''. F is the inversive center and points <math>D</math>,<math>F</math> and <math>B</math> are collinear and <math>DF \cdot DB</math> is of constant value. 
{{!}}  {{!}}  
{{!}}[[Image:Blowing engine.jpgcenterborder600px]]  {{!}}[[Image:Blowing engine.jpgcenterborder600px]]  
{{!}}  {{!}}  
  {{!}}align="center"{{!}}'''Image 17''' '''Ferguson, 1962, p. 205  +  {{!}}align="center"{{!}}'''Image 17''' 
+  {{!}}  
+  {{!}}Mr. Prim's blowing engine used for ventilating the House of Commons, 1877. The crosshead of the reciprocating air pump is guided by a Peaucellier linkage shown in the middle of '''Image 17'''. Prim's machine was driven by a steam engine.<ref>Ferguson, 1962, p. 205</ref>  
{{!}}}  {{!}}}  
Line 269:  Line 257:  
=='''Hart's Linkage'''==  =='''Hart's Linkage'''==  
{{{!}}  {{{!}}  
  {{!}}After PeaucellierLipkin Linkage was introduced to England in 1874, Mr. Hart of Woolwich Academy  +  {{!}}After the PeaucellierLipkin Linkage was introduced to England in 1874, Mr. Hart of Woolwich Academy <ref>Kempe, 1877, p. 18</ref> devised a new linkage that contained only four links which is the blue part as shown in '''Image 18'''. The next part will prove that point <math>O</math> is the inversion center with <math>OP</math> and <math>OQ</math> collinear and <math>OP \cdot OQ =</math> constant. When point <math>P</math> is constrained to move in a circle that passes through point <math>O</math>, then point <math>Q</math> will trace out a straight line. See below for proof. 
{{!}}  {{!}}  
  {{!}}[[Image:Hartlinkage3.pngbordercenter  +  {{!}}[[Image:Hartlinkage3.pngbordercenter550px]] 
{{!}}  {{!}}  
{{!}}align="center"{{!}}'''Image 18'''  {{!}}align="center"{{!}}'''Image 18'''  
Line 298:  Line 286:  
</math>,  </math>,  
  +  we then have <math> AC \cdot BD = (ED)^2  (EB)^2 = (AD)^2  (AB)^2</math>.  
  Further,  +  Further, let's define <math> \frac{OP}{BD} = m, hence \frac{OQ}{AC} = 1m </math> 
where <math>0<m<1</math>  where <math>0<m<1</math>  
  We have <math>\begin{align}  +  We finally have <math>\begin{align} 
OP \cdot OQ & = m(1m)BD \cdot AC\\  OP \cdot OQ & = m(1m)BD \cdot AC\\  
& = m(1m)((AD)^2  (AB)^2)  & = m(1m)((AD)^2  (AB)^2)  
  \end{align}</math>  +  \end{align}</math>which is what we wanted to prove. 
{{!}}}  {{!}}}  
=='''Other Straight Line Mechanism'''==  =='''Other Straight Line Mechanism'''==  
{{{!}}  {{{!}}  
  {{!}}[[Image:Circle in circle 1.pngbordercenter  +  {{!}}[[Image:Circle in circle 1.pngbordercenter200px]]{{!}}{{!}}[[Image:Circle in circle 2.pngbordercenter200px]]{{!}}{{!}}[[Image:Img335.gifbordercenter200px]] 
{{!}}  {{!}}  
  {{!}}align="center"{{!}}'''Image 19'''{{!}}{{!}}align="center"{{!}}'''Image 20'''{{!}}{{!}}align="center"{{!}}'''Image 21'''  +  {{!}}align="center"{{!}}'''Image 19'''{{!}}{{!}}align="center"{{!}}'''Image 20'''{{!}}{{!}}align="center"{{!}}'''Image 21''' <ref>Bryant, & Sangwin, 2008, p.44</ref> 
{{!}}  {{!}}  
  {{!}}colspan="3"{{!}}There are many other mechanisms that create straight line. I will only introduce one of them here. Refer to '''Image 19'''. Consider two circles <math>C_1</math> and <math>C_2</math> with radius having the relation <math>2r_2=r_1</math>. We roll <math>C_2</math> inside <math>C_1</math> without slipping as show in '''Image 20'''. Then the arch lengths <math>r_1\beta = r_2\alpha</math>. Voila! <math>\alpha = 2\beta</math> and point <math>C</math> has to be on the line joining the original points <math>P</math> and <math>Q</math>! The same argument goes for point <math>P</math>. As a result, point <math>C</math> moves in the horizontal line and point <math>P</math> moves in the vertical line. In 1801, James White patented his mechanism using this rolling motion. It is shown in '''Image 21'''  +  {{!}}colspan="3"{{!}}There are many other mechanisms that create straight line. I will only introduce one of them here. Refer to '''Image 19'''. Consider two circles <math>C_1</math> and <math>C_2</math> with radius having the relation <math>2r_2=r_1</math>. We roll <math>C_2</math> inside <math>C_1</math> without slipping as show in '''Image 20'''. Then the arch lengths <math>r_1\beta = r_2\alpha</math>. Voila! <math>\alpha = 2\beta</math> and point <math>C</math> has to be on the line joining the original points <math>P</math> and <math>Q</math>! The same argument goes for point <math>P</math>. As a result, point <math>C</math> moves in the horizontal line and point <math>P</math> moves in the vertical line. In 1801, James White patented his mechanism using this rolling motion. It is shown in '''Image 21''' <ref>Bryant, & Sangwin, 2008, p.4244</ref>. 
{{!}}  {{!}}  
{{!}}colspan="3" align="center"{{!}}[[Image:Ellipsograph2.pngbordercenter500px]]  {{!}}colspan="3" align="center"{{!}}[[Image:Ellipsograph2.pngbordercenter500px]]  
Line 321:  Line 309:  
{{!}}colspan="3" align="center"{{!}}'''Image 22'''  {{!}}colspan="3" align="center"{{!}}'''Image 22'''  
{{!}}  {{!}}  
  {{!}}colspan="3"{{!}}Interestingly, if you attach a rod of fixed length to point <math>C</math> and <math>P</math> and the end of the rod <math>T</math> will trace out an ellipse as seen in '''Image 22'''. Why? Consider the coordinates of <math>P</math> in terms of <math>\theta</math>, <math>PT</math> and <math>CT</math>. Point <math>T</math> will have the coordinates <math>(CT \cos \theta, PT \sin \theta)</math>. Now, whenever we see <math>\cos \theta</math> and <math>\sin \theta</math> together, we want to square them. Hence, <math>x^2=CT^2 \cos^2 \theta</math> and <math>y^2=PT^2 \sin^2 \theta</math>. Well, they are not so pretty yet. So we make them pretty by dividing <math>x^2</math> by <math>CT^2</math> and <math>y^2</math> by <math>PT^2</math>, obtaining <math>\frac {x^2}{CT^2} = \cos^2 \theta</math> and <math>\frac {y^2}{PT^2} = \sin^2 \theta</math>. Voila again! <math>\frac {x^2}{CT^2} + \frac {y^2}{PT^2}=1</math> and this is exactly the algebraic formula for an ellipse.  +  {{!}}colspan="3"{{!}}Interestingly, if you attach a rod of fixed length to point <math>C</math> and <math>P</math> and the end of the rod <math>T</math> will trace out an ellipse as seen in '''Image 22'''. Why? Consider the coordinates of <math>P</math> in terms of <math>\theta</math>, <math>PT</math> and <math>CT</math>. Point <math>T</math> will have the coordinates <math>(CT \cos \theta, PT \sin \theta)</math>. 
+  
+  Now, whenever we see <math>\cos \theta</math> and <math>\sin \theta</math> together, we want to square them. Hence, <math>x^2=CT^2 \cos^2 \theta</math> and <math>y^2=PT^2 \sin^2 \theta</math>.  
+  
+  Well, they are not so pretty yet. So we make them pretty by dividing <math>x^2</math> by <math>CT^2</math> and <math>y^2</math> by <math>PT^2</math>, obtaining <math>\frac {x^2}{CT^2} = \cos^2 \theta</math> and <math>\frac {y^2}{PT^2} = \sin^2 \theta</math>. Voila again! <math>\frac {x^2}{CT^2} + \frac {y^2}{PT^2}=1</math> and this is exactly the algebraic formula for an ellipse. <ref>Cundy, & Rollett, 1961, p. 240</ref>  
{{!}}}  {{!}}}  
=ConclusionThe Take Home Message=  =ConclusionThe Take Home Message=  
  We should not take the  +  We should not take the concept of straight line for granted and there are many interesting, and important, issues surrounding the concepts of straight line. A serious exploration of its properties and constructions will not only give you a glimpse of geometry's all encompassing reach into science, engineering and our lives, but also make you question many of the assumptions you have about geometry. Hopefully, you will start questioning the flatness of a plane, roundness of a circle and the nature of a point and allow yourself to explore the ordinary and discover the extraordinary. 
  +  
other=A little Geometry  other=A little Geometry  
AuthorName=Cornell University Libraries and the Cornell College of Engineering  AuthorName=Cornell University Libraries and the Cornell College of Engineering  
Line 333:  Line 324:  
SiteURL=http://kmoddl.library.cornell.edu/model.php?m=244  SiteURL=http://kmoddl.library.cornell.edu/model.php?m=244  
Field=Geometry  Field=Geometry  
  FieldLinks=*  +  FieldLinks=*http://kmoddl.library.cornell.edu/model.php?m=244 
*http://dlxs2.library.cornell.edu/cgi/t/text/textidx?c=math;cc=math;view=toc;subview=short;idno=Kemp009  *http://dlxs2.library.cornell.edu/cgi/t/text/textidx?c=math;cc=math;view=toc;subview=short;idno=Kemp009  
*http://kmoddl.library.cornell.edu/tutorials/04/  *http://kmoddl.library.cornell.edu/tutorials/04/  
Line 340:  Line 331:  
=Notes=  =Notes=  
<references/>  <references/>  
  +  References=#Bryant, John, & Sangwin, Christopher. (2008). How Round is your circle?. Princeton & Oxford: Princeton Univ Pr.  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  References=  +  
  #Bryant, John, & Sangwin, Christopher. (2008). How Round is your circle?. Princeton & Oxford: Princeton Univ Pr.  +  
#Cundy, H.Martyn, & Rollett, A.P. (1961). Mathematical models. Clarendon, Oxford : Oxford University Press.  #Cundy, H.Martyn, & Rollett, A.P. (1961). Mathematical models. Clarendon, Oxford : Oxford University Press.  
#Henderson, David. (2001). Experiencing geometry. Upper Saddle River, New Jersey: Prentice hall.  #Henderson, David. (2001). Experiencing geometry. Upper Saddle River, New Jersey: Prentice hall.  
Line 363:  Line 342:  
#Wikipedia (Cartesian coordinate system). (n.d.). Cartesian coordinate system. Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Cartesian_coordinate_system  #Wikipedia (Cartesian coordinate system). (n.d.). Cartesian coordinate system. Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Cartesian_coordinate_system  
#Wikipedia (Linkage (mechanical)). (n.d.). Linkage (mechanical). Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Linkage_(mechanical)  #Wikipedia (Linkage (mechanical)). (n.d.). Linkage (mechanical). Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Linkage_(mechanical)  
+  #Wikipedia (Closedform expression). (n.d.). Closedform expression. Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Closedform_expression  
#Lienhard, J. H. (1999, February 18). "I SELL HERE, SIR, WHAT ALL THE WORLD DESIRES TO HAVE  POWER". Retrieved from The Engines of Our Ingenuity: http://www.uh.edu/engines/powersir.htm  #Lienhard, J. H. (1999, February 18). "I SELL HERE, SIR, WHAT ALL THE WORLD DESIRES TO HAVE  POWER". Retrieved from The Engines of Our Ingenuity: http://www.uh.edu/engines/powersir.htm  
#Wikipedia (Peaucellier–Lipkin linkage). (n.d.). Peaucellier–Lipkin linkage. Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Peaucellier%E2%80%93Lipkin_linkage  #Wikipedia (Peaucellier–Lipkin linkage). (n.d.). Peaucellier–Lipkin linkage. Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Peaucellier%E2%80%93Lipkin_linkage  
    +  InProgress=No 
    +  ImageSize=280px 
}}  }} 
Current revision
Drawing a Straight Line 

Drawing a Straight Line
 The image shows the first planar linkage that drew a straight line without using a straight edge. Independently invented by a French army officer, CharlesNicolas Peaucellier and a Lithuanian (who some argue was actually Russian) mathematician Lipmann Lipkin, it had important applications in engineering and mathematics.^{[2]}^{[3]}^{[4]}
Introduction
What is a straight line? How do you define straightness? The questions seem silly to ask because they are so intuitive. We come to accept that straightness is simply straightness and its definition, like that of point and line, is simply assumed. However, why do we not assume the definition of circle? When using a compass to draw a circle, we are not starting with a figure that we accept as circular; instead, we are using a fundamental property of circles, that the points on a circle are at a fixed distance from the center. This page explores the answer to the question "how do you construct a straight line without a straight edge?"
What Is A Straight Line? A Question Rarely Asked.
Today, we simply define a line as a onedimensional object that extents to infinity in both directions and it is straight, i.e. no wiggles along its length. But what is straightness? It is a hard question because we can picture it, but we simply cannot articulate it.
Since we are dealing with plane geometry here, we define straight line as the curve of in Cartesian Coordinates.
Take a minute to ponder the question: "How do you produce a straight line?" Well light travels in straight line. Can we make light help us to produce something straight? Sure but does it always travel in straight line? Einstein's theory of relativity has shown (and been verified) that light is bent by gravity and therefore, our assumption that light travels in straight lines does not hold all the time. Well, another simpler method is just to fold a piece of paper and the crease will be a straight line. However, to achieve our ultimate goal (construct a straight line without a straight edge), we need a linkage and that is much more complicated and difficult than folding a piece of paper. The rest of the page revolves around the discussion of straight line linkage's history and its mathematical explanation.  
Image 1  Image 2 ^{[7]} 
The Quest to Draw a Straight Line
The Practical Need
James Watt's breakthrough
James Watt found a mechanism that converted the linear motion of pistons in the cylinder to the semi circular motion (that is moving in an arc of the circle) of the beam (or the circular motion of the flywheel) and vice versa. In this way, energy in the vertical direction is converted to rotational energy of the flywheel from where is it converted to useful work that the engine is desired to do. In 1784, he invented a three member linkage that solved the linearmotiontocircular problem practically as illustrated by the animation below. In its simplest form, there are two radius arms that have the same lengths and a connecting arm with midpoint P. Point P moves in a straight line while the two hinges move in circular arcs. However, this linkage only produced approximate straight line (a stretched figure 8 actually) as shown in Image 7, much to the chagrin of the mathematicians who were after absolute straight lines. There is a more general form of the Watt's linkage that the two radius arms having different lengths like shown in Image 6. To make sure that Point P still move in the stretched figure 8, it has to be positioned such that it adheres to the ratio.^{[15]}  
Image 6 ^{[16]}  Image 7 ^{[17]} 
The Motion of Point P
We intend to describe the path of so that we can show it does not move in a straight line (which is obvious in the animation). More importantly, this will allow us to pinpoint the position of using certain parameters we know, such as the angle of rotation or one coordinate of point . This is awfully crucial in engineering as engineers would like to know that there are no two parts of the machine will collide with each other throughout the motion. In addition, you can use the parametrization to create your own animation like that in Image 7.
Algebraic Description
We see that moves in a stretched figure 8 and will tend to think that there should be a nice closed form of the relationship of the and coordinates of like that of the circle. After this section, you will see that there is a closed form, at least theoretically, but it is not "nice" at all. 
Image 8 
We know coordinates and because they are fixed. We know coordinates and because they are fixed. Hence suppose the coordinates of are and coordinates of are . We also know the length of the bar. Let . Suppose that at one instance we know the coordinates of as , then will be on the circle centered at with a radius of . Since is on the circle centered at with radius . Then the coordinates of have to satisfy the two equations below.
Now, since we know that is on the circle centered at with radius , the coordinates of have to satisfy the equation . Therefore, the coordinates of have to satisfy the three equations below.
Now, expanding the first two equations we have,
Subtract Eq. 2 from Eq. 1 we have, Substituting and rearranging we have,
Hence Now, we can manipulate Eq. 3 to get an expression for , i.e. . Next, we substitute back into Eq. 1 and will be able to obtain an expression for , i.e. . Since , we have expressions of and in terms of and . Say point has coordinates , then and which will yield In the last step we substitute ,, Eq. 5 and Eq. 6 back into Eq. 4 and we will finally have a relationship between and . Of course, it will be a messy closed form but we could definitely use Mathematica to do the maths. The point is, there is no nice algebraic form for that figure 8, though it has closed form and that is why we have to find something else.

Parametric Description
Alright, since the algebraic equations are not agreeable at all, we have to resort to the parametric description. To think about, it may be more manageable to describe the motion of using the angle of ratation. As a matter of fact, it is easier to obtain the angle of rotation than knowing one of 's coordinates. 
Image 9 
We will parametrize the with the angle in conformation of most para [...] We will parametrize the with the angle in conformation of most parametrizations of point.
Now let . Then using cosine formula, we have As a result, we can express and as
Since , and being the coordinates of point , we can find in terms of . Furthermore, Therefore, Hence,
Now, is parametrized in term of and .

Image 10 ^{[19]} 
Watt's Secret
Another reason we parameterized is that Watt did not simply used that three bar linkage shown in Image 6 and Image 7. Instead he used something different. To understand that, our knowledge of the parameterizaion of is crucial. Imitations were a big problems back in those days. When filing for a patent, James Watt and other inventors had to explain how their devices worked without revealing the critical secrets so that others could easily copy them. As shown in Image 10, the original patent illustration, Watt illustrated his simple linkage on a separate diagram on the upper left hand corner but try looking for it on the engine illustration itself. Can you find it at all? That is Watt's secret. This is the equivalent of telling you by using the principle of 1+1 makes 2 you could get 34 x 45; the crucial step in understanding (and to make the engine work smoothly in Watt's case) is avoided. What he had actually used on his engine was the modified version of the basic linkage as show in Image 11.
 
Image 11  Image 12 
Well, it is easy enough. Refer to Image 12. Well, it is easy enough. Refer to Image 12. . Furthermore . Therefore, . We now have the parameterization of point and and Watt's secret is eventually cracked.

The First Planar Straight Line Linkage  PeaucellierLipkin Linkage
Image 13 ^{[20]}  Anyway, mathematicians and engineers had being searching for almost a century to find the solution to a straight line linkage but all had failed until 1864 when a French army officer Charles Nicolas Peaucellier came up with his inversor linkage. Interestingly, he did not publish his findings and proof until 1873, when Lipmann I. Lipkin, a student from University of St. Petersburg, demonstrated the same working model at the World Exhibition in Vienna. Peaucellier acknowledged Lipkin's independent findings with the publication of the details of his discovery in 1864 and the mathematical proof. Taimina

Image 14  
Let's turn to a skeleton drawing of the PeaucellierLipkin linkage in Image 14. It is constructed in such a way that and . Furthermore, all the bars are free to rotate at every joint and point is a fixed pivot. Due to the symmetrical construction of the linkage, it goes without proof that points , and lie in a straight line. Construct lines and and they meet at point .
Since shape is a rhombus and Now,
Therefore, Let's take a moment to look at the relation . Since the length and are of constant length, then the product is of constant value however you change the shape of this construction.  
Image 15  
Refer to Image 15. Let's fix the path of point such that it traces out a circle that has point on it. is the extra link pivoted to the fixed point with . Construct line that cuts the circle at point . In addition, construct line such that .
Since,
Moreover . Therefore constant, i.e. the length of (or the xcoordinate of w.r.t ) does not change as points and move. Hence, point moves in a straight line. ∎^{[21]} 
Inversive Geometry in PeaucellierLipkin Linkage
As a matter of fact, the first part of the proof given above is already sufficient. Due to inversive geometry, once we have shown that points , and are collinear and that is of constant value. Points and are inversive pairs with as inversive center. Therefore, once moves in a circle that contains , then will move in a straight line and vice versa. ∎ See Inversion for more detail.
PeaucellierLipkin Linkage in Action
Image 16 
The new linkage caused considerable excitement in London. Mr. Prim, "engineer to the House", utilized the new compact form invented by H.Hart to fit his new blowing engine which proved to be "exceptionally quiet in their operation." In this compact form, , and . Point and are fixed pivots. In Image 16. F is the inversive center and points , and are collinear and is of constant value. 
Image 17 
Mr. Prim's blowing engine used for ventilating the House of Commons, 1877. The crosshead of the reciprocating air pump is guided by a Peaucellier linkage shown in the middle of Image 17. Prim's machine was driven by a steam engine.^{[22]} 
Hart's Linkage
After the PeaucellierLipkin Linkage was introduced to England in 1874, Mr. Hart of Woolwich Academy ^{[23]} devised a new linkage that contained only four links which is the blue part as shown in Image 18. The next part will prove that point is the inversion center with and collinear and constant. When point is constrained to move in a circle that passes through point , then point will trace out a straight line. See below for proof. 
Image 18 
We know that
As a result, Draw line , intersecting at point . Consequently, points are collinear Construct rectangle
For , we then have . Further, let's define where We finally have which is what we wanted to prove. 
Other Straight Line Mechanism
Image 19  Image 20  Image 21 ^{[24]} 
There are many other mechanisms that create straight line. I will only introduce one of them here. Refer to Image 19. Consider two circles and with radius having the relation . We roll inside without slipping as show in Image 20. Then the arch lengths . Voila! and point has to be on the line joining the original points and ! The same argument goes for point . As a result, point moves in the horizontal line and point moves in the vertical line. In 1801, James White patented his mechanism using this rolling motion. It is shown in Image 21 ^{[25]}.  
Image 22  
Interestingly, if you attach a rod of fixed length to point and and the end of the rod will trace out an ellipse as seen in Image 22. Why? Consider the coordinates of in terms of , and . Point will have the coordinates .
Now, whenever we see and together, we want to square them. Hence, and . Well, they are not so pretty yet. So we make them pretty by dividing by and by , obtaining and . Voila again! and this is exactly the algebraic formula for an ellipse. ^{[26]} 
ConclusionThe Take Home Message
We should not take the concept of straight line for granted and there are many interesting, and important, issues surrounding the concepts of straight line. A serious exploration of its properties and constructions will not only give you a glimpse of geometry's all encompassing reach into science, engineering and our lives, but also make you question many of the assumptions you have about geometry. Hopefully, you will start questioning the flatness of a plane, roundness of a circle and the nature of a point and allow yourself to explore the ordinary and discover the extraordinary.
Teaching Materials
 There are currently no teaching materials for this page. Add teaching materials.
About the Creator of this Image
KMODDL is a collection of mechanical models and related resources for teaching the principles of kinematicsthe geometry of pure motion. The core of KMODDL is the Reuleaux Collection of Mechanisms and Machines, an important collection of 19thcentury machine elements held by Cornell's Sibley School of Mechanical and Aerospace Engineering.
Related Links
Additional Resources
 http://kmoddl.library.cornell.edu/model.php?m=244
 http://dlxs2.library.cornell.edu/cgi/t/text/textidx?c=math;cc=math;view=toc;subview=short;idno=Kemp009
 http://kmoddl.library.cornell.edu/tutorials/04/
 http://www.howround.com/
 http://en.wikipedia.org/wiki/Wikipedia:Citing_sources
Notes
 ↑ Wikipedia (Linkage (mechanical))
 ↑ Bryant, & Sangwin, 2008, p. 34
 ↑ Kempe, 1877, p. 12
 ↑ Taimina
 ↑ Wikipedia (Cartesian coordinate system)
 ↑ Wikipedia (Linkage (mechanical))
 ↑ Weisstein
 ↑ Bryant, & Sangwin, 2008, p. 18
 ↑ Bryant, & Sangwin, 2008, p. 18
 ↑ Wikipedia (Steam Engine)
 ↑ Bryant, & Sangwin, 2008, p. 1821
 ↑ Bryant, & Sangwin, 2008, p. 1821
 ↑ Bryant, & Sangwin, 2008, p. 1821
 ↑ Bryant, & Sangwin, 2008, p. 1821
 ↑ Bryant, & Sangwin, 2008, p. 24
 ↑ Bryant, & Sangwin, 2008, p. 23
 ↑ Wikipedia (Watt's Linkage)
 ↑ Wikipedia (Closedform expression)
 ↑ Lienhard, 1999, February 18
 ↑ Wikipedia (Peaucellier–Lipkin linkage)
 ↑ Bryant, & Sangwin, 2008, p. 3336
 ↑ Ferguson, 1962, p. 205
 ↑ Kempe, 1877, p. 18
 ↑ Bryant, & Sangwin, 2008, p.44
 ↑ Bryant, & Sangwin, 2008, p.4244
 ↑ Cundy, & Rollett, 1961, p. 240
References
 Bryant, John, & Sangwin, Christopher. (2008). How Round is your circle?. Princeton & Oxford: Princeton Univ Pr.
 Cundy, H.Martyn, & Rollett, A.P. (1961). Mathematical models. Clarendon, Oxford : Oxford University Press.
 Henderson, David. (2001). Experiencing geometry. Upper Saddle River, New Jersey: Prentice hall.
 Kempe, A. B. (1877). How to Draw a straight line; a lecture on linkage. London: Macmillan and Co..
 Taimina, D. (n.d.). How to Draw a Straight Line. Retrieved from The Kinematic Models for Design Digital Library: http://kmoddl.library.cornell.edu/tutorials/04/
 Ferguson, Eugene S. (1962). Kinematics of mechanisms from the time of watt. United States National Museum Bulletin, (228), 185230.
 Weisstein, Eric W. Great Circle. Retrieved from MathWorldA Wolfram Web Resource: http://mathworld.wolfram.com/GreatCircle.html
 Wikipedia (Steam Engine). (n.d.). Steam Engine. Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Steam_engine
 Wikipedia (Watt's Linkage). (n.d.). Watt's Linkage. Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Watt%27s_linkage
 Wikipedia (Cartesian coordinate system). (n.d.). Cartesian coordinate system. Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Cartesian_coordinate_system
 Wikipedia (Linkage (mechanical)). (n.d.). Linkage (mechanical). Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Linkage_(mechanical)
 Wikipedia (Closedform expression). (n.d.). Closedform expression. Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Closedform_expression
 Lienhard, J. H. (1999, February 18). "I SELL HERE, SIR, WHAT ALL THE WORLD DESIRES TO HAVE  POWER". Retrieved from The Engines of Our Ingenuity: http://www.uh.edu/engines/powersir.htm
 Wikipedia (Peaucellier–Lipkin linkage). (n.d.). Peaucellier–Lipkin linkage. Retrieved from Wikipedia: http://en.wikipedia.org/wiki/Peaucellier%E2%80%93Lipkin_linkage
Leave a message on the discussion page by clicking the 'discussion' tab at the top of this image page.
colspan="2"Today, we simply define a line as a onedimensional object that extents to infinity in both directions and it is straight, i.e. no wiggles along its length. But what is straightness? It is a hard question because we can picture it, but we simply cannot articulate it.
In Euclid's book Elements, he defined a straight line as "lying evenly between its extreme points" and as having "breadthless width." This definition is pretty useless. What does he mean by "lying evenly"? It tells us nothing about how to describe or construct a straight line.
So what is a straightness anyway? There are a few good answers. For instance, in the Cartesian Coordinates , the graph of is a straight line as shown in Image 1. In addition, the shortest distance between two points on a flat plane is a straight line, a definition we are most familiar with. However, it is important to realize that the definitions of being "shortest" and "straight" will change when you are no longer on flat plane. For example, the shortest distance between two points on a sphere is the the "great circle" as shown in Image 2.
Since we are dealing with plane geometry here, we define straight line as the curve of in Cartesian Coordinates.
For more comprehensive discussion of being straight, you can refer to the book Experiencing Geometry by David W. Henderson.
Take a minute to ponder the question: "How do you produce a straight line?" Well light travels in straight line. Can we make light help us to produce something straight? Sure but does it always travel in straight line? Einstein's theory of relativity has shown (and been verified) that light is bent by gravity and therefore, our assumption that light travels in straight lines does not hold all the time. Well, another simpler method is just to fold a piece of paper and the crease will be a straight line. However, to achieve our ultimate goal (construct a straight line without a straight edge), we need a linkage and that is much more complicated and difficult than folding a piece of paper. The rest of the page revolves around the discussion of straight line linkage's history and its mathematical explanation. 
align="center"