Search All of the Math Forum:
Views expressed in these public forums are not endorsed by
Drexel University or The Math Forum.
|
|
IMECS
Posts:
2
Registered:
5/14/12
|
|
Call for Papers: The 2013 IAENG International Conference on Industrial Engineering (ICINDE�13)
Posted:
Nov 13, 2012 9:43 AM
|
|
Call for Papers: The 2013 IAENG International Conference on Industrial
Engineering (ICINDE¹13)
CFP: The 2013 IAENG International Conference on Industrial Engineering
(ICINDE¹13)
Draft Manuscript submission deadline: 8 December, 2012
Camera-Ready papers & registration deadline: 10 January, 2013
ICINDE 2013: Hong Kong, 13-15 March, 2013
http://www.iaeng.org/IMECS2013/ICINDE2013.html
The conference ICINDE'13 is held under the International
MultiConference of Engineers and Computer Scientists (IMECS) 2013. The
IMECS 2013 is organized by the International Association of Engineers
(IAENG), a non-profit international association for the engineers and
the computer scientists. The conference has the focus on the frontier
topics in the theoretical and applied engineering and computer science
subjects. The IMECS conferences serve as good platforms for our
members and the entire engineering community to meet with each other
and to exchange ideas. Our IMECS committees have been formed with over
two hundred and sixty committees members who are mainly research
center heads, faculty deans, department heads, professors, and
research scientists from over 30 countries. The last IMECS 2012 has
attracted more than eight hundred participants from over 50
countries.
All submitted papers will be under peer review and accepted papers
will be published in the conference proceeding (ISBN:
978-988-19251-8-3). Revised and expanded version of the selected
papers may be included as book chapters in the standalone edited books
under the framework of cooperation between IAENG and publishers like
Springer. The abstracts will be indexed and available at major
academic databases. The accepted papers will also be considered for
publication in the special issues of the journal Engineering Letters,
in IAENG journals and in edited books. For reference, the recent IAENG
post conference edited books include titles like for example: Trends
in Intelligent Systems and Computer Engineering, Advances in
Communication Systems and Electrical Engineering, and Advances in
Industrial Engineering and Operations Research by Springer.
The topics of the ICINDE'13 include, but not limited to, the
following:
Engineering Physiology
Biomedical Instrumentation
Engineering Statistics
Quality Management Systems
Maintenance Engineering
Reliability and Quality Control
Engineering Experimental Design
Integrated Product Engineering
Engineering Risk and Decision Analysis
Computer Supported Collaborative Engineering
Human Factors and Ergonomics
Computer-Aided Design
Computer Aided Manufacturing
Computer Simulation Methods
Facilities Design and Logistics
Manufacturing Processes and Methods
Information Systems for the Manufacturing
Quality and Productivity Management
Optimization Methods
Intelligent Engineering Systems
Engineering Management and Leadership
ICINDE Conference Co-Chairs and Committee Members:
Prof. Basim Al-Najjar
Professor of Terotechnology (Systemekonomi)
Chairman of the Centre of Industrial Competitiveness (CIC)
School of Technology and Design, Vaxjo University, Sweden
Dr. N. Alagumurthi
Assistant Professor, Department of Mechanical Engineering,
Pondicherry Engineering College, India
Prof. Ali Allahverdi
Professor, Department of Industrial and Management Systems Eng.,
Kuwait University, Kuwait
Dr. Ioannis Angeli
Lecturer, Department of Mechanical Engineering & Materials Science
and Engineering, Cyprus University of Technology, Cyprus
Dr. Chan Ching-Yuen
Lecturer, Department of Industrial & Systems Engineering
The Hong Kong Polytechnic University, Hong Kong
Dr. Danny SK Chan (co-chair)
Lecturer, Department of Industrial and Systems Engineering
The Hong Kong Polytechnic University, Hong Kong
Dr. Alan Hoi-shou Chan (co-chair)
Associate Professor, Department of Systems Engineering and Engineering
Management
President of the Hong Kong Ergonomics Society (2003-2005)
City University of Hong Kong, Hong Kong
Dr. Qi Chao
Research scientist, Singapore-MIT Alliance, Nanyang Technological
University, Singapore
Dr. Tsung-Hui Chen
Assistant Professor, Department of Marketing and Logistics
Management,
National Pingtung Institute of Commerce, Taiwan
Dr. Yee-Ming Chen
Associate Professor, Dept. of Industrial Engineering
Yuan Ze University, Taiwan
Dr. Kong Bieng Chuah (session chair of the organization learning)
Associate Professor, Department of Systems Engineering and
Engineering Management
City University of Hong Kong, Hong Kong
Prof. Gang (Gary) Feng
Associate Provost and Chair Professor of Mechatronic Engineering
Department of Mechanical and Biomedical Engineering
City University of Hong Kong, Hong Kong
Associate editor, IEEE Trans. on Fuzzy Systems
Prof. Heung Suk Hwang (co-chair)
Chair Professor, Department of Port & Logistics System, College of
Port & Logistics, TongMyong University, South Korea
Former President of Korea Institute of Industrial Engineering, KIIE,
and
The Editor-in-Chief of International Journal of Industrial Engineering
and Management Systems
Dr. Ralph W.L. IP
Executive Director of Fong¹s Research Centre for Advanced Mechanical
Systems,
Honorary Associate Professor in the Department of Mechanical
Engineering,
University of Hong Kong, Hong Kong
Prof. Shigekazu Ishihara
Department of Kansei Design, Faculty of Psychological Science
Hiroshima International University, Japan
Dr. Ajai Jain
Assistant Professor, Mechanical Engineering Department, National
Institute of Technology, India
Prof. Limin Jia
Chair Professor, School of Traffic and Transportation,
Beijing Jiaotong University, China
Dr. Voratas Kachitvichyanukul
Associate Professor, Industrial Engineering & Management,
School of Engineering and Technology, Asian Institute of Technology,
THAILAND
Dr. Wen-Hung Kuo (co-chair)
Associate Professor, Department of Information Management
National Formosa University, Taiwan
Prof. Ho Woo Lee
Professor of Industrial Engineering and Systems Management
Engineering, Sungkyunkwan University, South Korea
Dr. Yun-Chia Liang
Associate Professor, Department of Industrial Engineering &
Management, Yuan Ze University, Taiwan
Dr. Chuar-yuan Lin
Associate Professor, Department of Industrial Engineering and
Technology Management
Da-Yeh University, Taiwan
Dr. Chiung Moon (co-chair)
Associate Professor, Department of Information & Industrial
Engineering,
Yonsei University, Seoul, South Korea
Area Editor of the Journal of Industrial Engineering & Management
Systems
Dr. C.S.P.Rao
Associate Professor, Mechanical Engineering Department, National
Institute of Technology, India
Prof. Susumu Saito
The Institute for Science of Labour, Japan
President, Japan Ergonomics Society
Prof. Lothar Schulze
Professor and Head of the Department of Planning and Controlling of
Warehouse and Transport Systems (PSLT),
Leibniz Universitat Hannover, Germany
Dr. Rosemary R. Seva
Chair, Department of Industrial Engineering, De La Salle University,
Philippines
Prof. V. Soundararajan
Professor & Head, Department of Mechanical Engineering, Pondicherry
Engineering College, India
Prof. Mihail Aurel Titu
Professor of Quality Management, Director of Intellectual Property
Department, Lucian Blaga University of Sibiu, Romania
Dr. Ali Riza Yildiz
Researcher, Department of Mechanical Engineering, University of
Michigan, USA
Dr. K.C. Winco Yung (co-chair)
Associate Professor, PhD
Centre-in-Charge, PCB Technology Center
Associate Director, AMT Research Center, Department of Industrial and
Systems Engineering
The Hong Kong Polytechnic University, Hong Kong
ICINDE'13 Special session: Human Factors, Ergonomics, and Safety
Special session chair:
Dr. Alan Hoi-shou Chan
Associate Professor, Department of Systems Engineering and
Engineering Management
City University of Hong Kong, Hong Kong
=========
Submission:
IMECS 2013 is now accepting manuscript submissions. Prospective
authors are invited to submit their draft paper in full paper (any
appropriate style) to imecs{at}iaeng.org. The submitted file can be in
MS Word format, PS format, or PDF formats.
The first page of the draft paper should include:
(1) Title of the paper;
(2) Name, affiliation and e-mail address for each author;
(3) A maximum of 5 keywords of the paper.
Also, the name of the conference that the paper is being submitted to
should be stated in the email.
It is our target that the reviewing process and the result
notification for each submitted manuscript can be completed within one
month from its submission. The reviewing process is to ensure the
quality of the accepted papers in the conference.
More details about the IMECS 2013 can be found at:
http://www.iaeng.org/IMECS2013/index.html
More details about the International Association of Engineers, and the
IAENG International Journal of Computer Science, and the IAENG
International Journal of Applied Mathematics can be found at:
http://www.iaeng.org/about_IAENG.html
http://www.iaeng.org/IJCS/index.html
http://www.iaeng.org/IJAM/index.html
The official journal web site of Engineering Letters at:
http://www.engineeringletters.com
http://www.engineeringletters.net
http://www.engineeringletter.com
********
It will be highly appreciated if you can circulate these calls for
papers to your colleagues.
|
|
|
|
