Search All of the Math Forum:

Views expressed in these public forums are not endorsed by NCTM or The Math Forum.

Notice: We are no longer accepting new posts, but the forums will continue to be readable.

Topic: Linebreaks in FuzzyARTMAP program
Replies: 0

 Rajeev Raizada Posts: 7 Registered: 12/7/04
Linebreaks in FuzzyARTMAP program
Posted: Apr 16, 1997 6:14 PM

Dear All,

It has been pointed out to me that
line-breaks into the Fuzzy ARTMAP demo
which I posted, causing the Matlab
code not to run.

Here is the code but with shorter lines.
This should solve the problem.

Yours,
rajeev@cns.bu.edu

%%% Implementation of a Fuzzy ARTMAP graphical demo, in Matlab

disp('Graphical demo of Fuzzy ARTMAP learning');
disp(' ');
disp(' Dept. of Cognitive and Neural Systems, ');
disp(' Boston University.');
disp('E.mail: rajeev@cns.bu.edu');
disp(' ');
disp('Original Reference:');
disp('Carpenter, G. A., Grossberg, S., Markuzon, N., ');
disp('Reynolds, J. H. and Rosen, D. B. (1992) ');
disp('"Fuzzy ARTMAP: A Neural Network Architecture for Incremental');
disp('Supervised Learning of Analog Multidimensional Maps"');
disp('IEEE Transactions on Neural Networks,');
disp('Vol. 3, No. 5, pp. 698-713.');
disp(' ');
disp('Category boxes are shown, along with the');
disp('true decision boundary.');
disp('A category which resonates in the ARTa module for');
disp('a given input lights up, shown with a thick line.');
disp('It may then get reset by F_ab layer mismatch, and shown dotted.');
disp('Categories which match at F_ab can undergo learning.');
disp('Fast learning is used here, so a category box expands');
disp('to contain the input.');
disp(' ');
disp('Key:');
disp('Presented point: *');
disp('Category which predicts being INSIDE the circle: Solid line');
disp('Category which predicts being OUTSIDE the circle: Dashed line');
disp('Category resonating within ARTa module: Thick line');
disp('Category reset by match-tracking: Dotted line');
disp('Point sized category: marked by a cross: x');
disp(' ');
disp('After each step, the program pauses. PRESS ANY KEY TO CONTINUE');

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% The input and output

num_pats = 100;
sq = 1; % Size of square
r = sq/sqrt(2*pi);
% Radius of circle so it's half area of square
xcent = 0.5;
ycent = 0.5; % Centre of circle
a = [ xcent*ones(1,num_pats); ycent*ones(1,num_pats)] + ...
sq*(0.5-rand(2,num_pats)); % The x,y coords
bmat = ((a(1,:)-xcent).^2 + (a(2,:)-ycent).^2) > r^2;
bmat = [ bmat; 1-bmat ]; % Change to [1 0], [0 1] form

ac = [a; ones(size(a))-a]; % The complement-coded form of input a

%%%%%%%%%%%%%%%%% If we are testing, make a grid of test inputs
test_mode = 0; % Zero means we're testing, 1 means training

if test_mode==1,
grain = 100;
grx = linspace(xcent-sq/2,xcent+sq/2,grain)';
gry = linspace(ycent-sq/2,ycent+sq/2,grain)';
testpats = zeros(grain^2,2); % Initialise
for i=1:grain,
testpats(1+grain*(i-1):i*grain,1) = grx;
testpats(1+grain*(i-1):i*grain,2) = ...
ones(grain,1)*gry(i);
end;
testpats = [ testpats' ; 1-testpats' ];
test_out = zeros(size(testpats,2),1);
% Initialise output vector
end;

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Parameters

alpha = 0.001; % "Choice" parameter > 0. Set small for the
% conservative limit (Fuzzy AM paper, Sect.3)
beta = 1; % Learning rate. Set to 1 for fast learning
rho_a_bar = 0; % Baseline vigilance for ARTa, in range [0,1]
M = size(a,1); % Number of input components. Derived from data
% NB: Total input size = 2M (due to complement)
N = 20; % Number of available coding nodes
% then, if we need to, can add more uncommitted
L = size(bmat,1); % Number of output nodes. Derived from data
rho_ab = 0.95; % Map field vigilance, in [0,1]
epsilon = 0.001; % Fab mismatch raises ARTa vigilance to this
% much above what is needed to reset ARTa
num_patterns = size(a,2); % Number of input patterns

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Set up weights

w_a = ones(2*M,N); % Initial weights in ARTa. All set to 1
% Row-i, col-j entry = weight from input node i
% to F2 coding node j
w_ab = ones(L,N); % Row-k, col-j entry = weight from ARTa F2
% node j to Map Field node k
committed_nodes = []; % Keep a record of which nodes get committed

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Main loop
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

for i=1:num_patterns % Go through patterns one by one
% Note: could shuffle order using randperm

A = ac(:,i); % Present input is i-th column of ac

%%%%%%%%%%%%%%%%%%% Plot all the category boxes
figure(1);
clf;
%%%% Box x-path: u1, 1-vc1, 1-vc1, u1, u1
%%%% Box y-path: u2, u2, 1-vc2, 1-vc2, u2
hold on;
h = plot([w_a(1,:); 1-w_a(3,:); 1-w_a(3,:); ...
w_a(1,:); w_a(1,:)], ...
[w_a(2,:); w_a(2,:); 1-w_a(4,:); ...
1-w_a(4,:); w_a(2,:)],'-');
%%%%%%%% Make the outside-circle predicting boxes dashed
outboxes = find(w_ab(1,:)>w_ab(2,:));
%%%%%%% w_ab will be near [1 0]
if outboxes ~= [],
set( h(outboxes),'LineStyle','--');
end;
%%%%%%%%%% Mark all the point-size boxes with crosses
point_boxes = find(abs(sum(w_a)-M)<0.001);
for j=1:length(point_boxes),
hpoint = plot(w_a(1,point_boxes(j)), ...
w_a(2,point_boxes(j)),'x');
h(point_boxes(j)) = hpoint;
%%% Make handle point to 'x'
end;
%%%%%%%%%%%%%%%%%%%%%%%%%%%% Plot the input vector
title(['Presenting input number ' num2str(i) ...
'. It is ( ' num2str(A(1)) ...
', ' num2str(A(2)) ' )' ]);
plot(A(1),A(2),'*'); % Show the input with a star
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Draw the circle
ang = 0:0.1:2.1*pi;
plot(xcent+r*cos(ang),ycent+r*sin(ang),'-');
axis([-0.1 1.1 -0.1 1.1]);
axis('equal');
drawnow;
hold off;
pause;

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Find an ARTa resonance which gives Fab resonance too

%%%%%%%%%%%%%%%%% Initialise
rho_a = rho_a_bar;
% We start off with ARTa vigilance at baseline
resonant_a = 0;
% We're not resonating in the ARTa module yet
resonant_ab = 0;
% Not resonating in the Fab match layer either
already_reset_nodes = []; % We haven't rest any ARTa nodes
% for this input pattern yet

while resonant_ab == 0, %%%% We don't have an Fab match yet.
%%%% So, we find an ARTa node and see what it predicts

while resonant_a == 0,
%%% In search of a resonating ARTa node...

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%% Find the winning, matching ARTa node
N = size(w_a,2);
% Count how many F2a nodes we have

A_for_each_F2_node = A * ones(1,N);
% Matrix containing a copy of A for
% each F2 node. Useful for Matlab

A_AND_w = min(A_for_each_F2_node,w_a);
% Fuzzy AND = min

S = sum(A_AND_w);
% Row vector of signals to F2 nodes

T = S ./ (alpha + sum(w_a));
% Choice function vector for F2

%%%%%%%%% Set all the reset nodes to zero

%%%%%%%%%%%% Finding the winning node, J

[ Tmax, J ] = max(T);
% Matlab function max works such that
% J is the lowest index of max T elements, as
% desired. J is the winning F2 category node

y = zeros(1,N);
y(J)=1;
% Activities of F2. All zero, except J

w_J = w_a(:,J);
% Weight vector into winning F2 node, J

x = min(A,w_J);
% Fuzzy version of 2/3 rule. x is F1 activity
% NB: We could also use J-th element of S
% since the top line of the match fraction
% |I and w|/|I| is sum(x), which is
% S = sum(A_AND_w) from above

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%% Testing if the winning node resonates in ARTa

if sum(x)/sum(A) >= rho_a,
% If a match, we're done
resonant_a = 1; % ARTa resonates
end;
% The while resonant_a == 0 command will stop looping
% now, so we exit the while loop and go onto to Fab

if sum(x)/sum(A) < rho_a,
% If mismatch then we reset
resonant_a = 0; % So, still not resonating
end; % Record that node J has been

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Creating a new node if we've reset all of them

% If all F2a nodes reset
w_a = [ w_a ones(2*M,1) ];
% Add uncommitted node to ARTa weight vector
w_ab = [w_ab ones(L,1) ];
% Give the new F2a node a w_ab entry
% Draw on the new uncommitted category box
hold on;
hnew = plot([0 1 1 0 0],[0 0 1 1 0],'-');
hold off;
h = [ h; hnew ];
%%% Add handle for new box to list
end; % Now go back and this new node should win

end; % End of the while loop searching for ARTa resonance
% If resonant_a = 0, we pick the next highest Tj
% and see if *that* node resonates, i.e. goto "while"
% If resonant_a = 1, we have found an ARTa resonance,
% namely node J
% So we go on to see if we get Fab match with node J

%%%%%%%%% Show the winning, matching ARTa node J
set(h(J),'LineWidth',[4]);
title(['Node ' num2str(J) ' was chosen by ARTa search.' ...
' Choice = ' num2str(Tmax) '. Match = ' ...
num2str(sum(x)/sum(A)) '. Rho_a = ' num2str(rho_a) ]);
pause;

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Match tracking

if test_mode==0, % If we're not testing
b = bmat(:,i);
% Desired output for input number i
z = min(b,w_ab(:,J)); % Fab activation vector, z
% (Called x_ab in Fuzzy ARTMAP paper)

%%%%%% Test for Fab resonance

if sum(z)/sum(b) >= rho_ab, % We have an Fab match
resonant_ab = 1;
title(['Desired: ' num2str(b) ...
'. F_ab act: ' num2str(z) '. F_ab match score: '...
num2str(sum(z)/sum(b)) '. Rho_ab = ' num2str(rho_ab) ...
'. Match field resonates.']);
pause;
end; % This will cause us to leave the
% while resonant_ab==0 loop and
% go on to do learning.

if sum(z)/sum(b) < rho_ab,
% We have an Fab mismatch
resonant_ab = 0;
% This makes us go through
% the resonant_ab==0 loop again
resonant_a = 0; % This makes us go through
% ARTa search again, this
% search being inside the
% resonant_ab==0 loop
% Increase rho_a vigilance.
% This will cause F2a node J to get reset when
% we go back through the ARTa search loop again.
% Also, *for this input*, the above-baseline
% vigilance will cause a finer ARTa category to win

rho_a = sum(x)/sum(A) + epsilon;

%%%% Make the reset box dotted and thin
title(['Desired out: ' num2str(b) ...
'. F_ab act: ' num2str(z) '. Match field resets. ' ...
'Rho_a increased to ' num2str(rho_a) ]);
set(h(J),'LineStyle',':');
set(h(J),'LineWidth',[0.5]);
pause;

end; % End of Fab mismatch if

end; % End of "if test_mode==0"

if test_mode==1,
% If we're testing there can be no Fab mismatch
% We just want the prediction.
resonant_ab = 1; % This is just to exit the loop
test_out(i) = w_ab(:,J)/sum(w_ab(:,J));
% The prediction is the normalised w_ab vector
end;

end; %%%%%%%%% End of the while resonant_ab==0 loop.
%%%%%%%%% Now we have a resonating ARTa output
%%%%%%%%% which gives a match at the Fab layer.
%%%%%%%%% So, we go on to have learning
%%%%%%%%% in the w_a and w_ab weights

%%%%%%%%%% Let the winning, matching node J learn

w_a(:,J) = beta*x + (1-beta)*w_a(:,J);
% NB: x = min(A,w_J) = I and w
%%%% Learning on F1a <--> f2a weights

w_ab(:,J) = beta*z + (1-beta)*w_ab(:,J);
% NB: z=min(b,w_ab(J))=b and w

end; %%%%%%%%% End of considering this input.
%%%%%%%%% Now we go on to the next input, and repeat