Search All of the Math Forum:
Views expressed in these public forums are not endorsed by
Drexel University or The Math Forum.


Ray
Posts:
11
Registered:
7/6/08


Re: Limiting output range; computing n log2 n
Posted:
Feb 18, 2013 7:35 PM


"Steven_Lord" <slord@mathworks.com> wrote in message <kfs6jh$kv2$1@newscl01ah.mathworks.com>... > > > "Ray" <RayMitchell@MeanOldTeacher.com> wrote in message > news:kfrofe$7k6$1@newscl01ah.mathworks.com... > > "Bruno Luong" <b.luong@fogale.findmycountry> wrote in message > > <kfr5c6$7pe$1@newscl01ah.mathworks.com>... > >> "Ray" <RayMitchell@MeanOldTeacher.com> wrote in message > >> > > >> > Thanks for the response. That does fix the issue in my question 2, but > >> > the issue in question 1 still exists. > >> > >> Use axis() command to fix the range you want the plot appears. > >> > >> Bruno > > > > Bruno, > > > > As shown in my sample code I have used axis([0, 40, 0, 200]) to provide > > the desired range of the axes and I have limited the values that will > > actually be used on the x axis by doing n = 0:1:40; However, for the last > > two cases that I am plotting the value of y will be much greater than 200, > > thereby causing the y axis to be greatly compressed in order to display > > these large values. Is there a way to tell it not to display any y values > > greater than a certain value? > > Call AXIS _after_ plotting to force the limits to be what you want. > >  > Steve Lord > slord@mathworks.com > To contact Technical Support use the Contact Us link on > http://www.mathworks.com
That did the trick! Thanks for your help! Ray



